(804) 991-8549
Congratulations on your new xPark Electric Ride! Unboxing and assembling your electric scooter, bike, skateboard, or ATV is the first step to a thrilling journey. We’ve created this detailed guide to help you set up your new ride quickly and easily. Follow these steps to ensure a smooth and safe assembly process.
Unboxing Your xPark Electric Ride
Before you start, make sure you have a clean, open space to work in. Carefully open the box and take out all components, checking them against the included parts list to ensure nothing is missing.
- Open the Box:
- Use a box cutter or scissors to cut the tape along the edges of the box.
- Open the flaps and remove any protective packaging materials.
- Remove Components:
- Carefully lift out the main body of your electric ride.
- Remove smaller parts and accessories from their compartments.
- Lay out all components on a flat surface, ensuring you have everything you need.
- Inspect for Damage:
- Inspect each part for any signs of damage that may have occurred during shipping.
- If you find any issues, contact xPark customer support for assistance.
Assembly Instructions by Ride Type
Disclaimer: Some products will require more assembly work than others. If you ever have trouble please reach out by phone or email. Our expert team is here to help you.
Electric Scooters:
- Insert the handlebar stem into the mainframe.
- Tighten the bolts using the provided Allen wrench.
- Ensure the handlebars are secure and aligned properly.
- Slide the battery into its designated compartment.
- Secure it with any included fasteners.
- Connect the battery cable to the motor.
- Check the brake lever and adjust as necessary for optimal performance.
- Inflate the tires to the recommended pressure using a tire pump.
- Test the Electronics:
- Turn on the scooter and check that all electronics, including lights and the display, are working correctly.
Electric Bikes:
- Align the front wheel with the fork and insert the axle.
- Tighten the quick-release lever or axle nuts securely.
- Insert the handlebar stem into the frame.
- Adjust the height and angle before tightening the bolts.
- Screw the pedals into the crank arms, ensuring the left and right pedals are correctly positioned.
- Tighten with a pedal wrench.
- Slide the battery into its holder and secure it.
- Connect the battery cable to the motor.
- Test the brake levers and adjust the tension as needed.
- Shift through the gears to ensure smooth transitions.
Electric Skateboards:
- Attach the wheels to the trucks using the provided nuts.
- Tighten securely but ensure the wheels spin freely.
- Attach the trucks to the underside of the skateboard deck.
- Tighten the mounting bolts firmly.
- Insert the battery into its compartment on the underside of the deck.
- Secure it with any provided fasteners.
- Turn on the skateboard and the remote control.
- Follow the instructions to sync the remote with the board.
Electric ATVs:
- Lift the ATV and align the wheels with the axles.
- Secure them using the provided nuts and a wrench.
- Insert the handlebar stem into the front frame.
- Adjust the angle and height before tightening the bolts.
- Place the seat onto the frame and secure it with bolts.
- Ensure the seat is firmly attached and at a comfortable height.
- Insert the battery into its designated compartment.
- Connect the battery cables to the motor and secure them.
- Test the brake levers and adjust if necessary.
- Ensure the suspension components are secure and functioning properly.
Final Checks and Safety Tips
Conclusion
Setting up your xPark Electric Ride is an exciting step towards new adventures. By following this unboxing and assembly guide, you’ll ensure your electric scooter, bike, skateboard, or ATV is ready for safe and enjoyable use. If you encounter any issues during assembly, don’t hesitate to contact our customer support team for assistance.
Get ready to experience the thrill and convenience of your new xPark Electric Ride. Happy riding!
